Replace the literal "Approval policy: ask." runtime-context sentence
with a statement parallel to the never-policy sentence, and refresh the
current-generation fixtures that persist it.
Co-authored-by: Tianyi Cui <[email protected]>
* refactor(llm-deepseek): share the /models listing machinery
Move the account route's `/models` request and decoding, its
credential-scoped listing cache, and listed-catalog resolution with the
version gate into the shared DeepSeek Messages library, so a second
route can follow the same listing. Names drop the account prefix, the
cache takes each access's endpoint settings with the call, and it gains
`invalidate()` for a forced reload. `isBuiltInCatalog()` recognizes the
catalog an uncustomized `models` setting resolves to.
The account route keeps its behavior; only its imports and the
override diagnostic wording ("model listing") change.
* feat(llm-deepseek-api-key): follow the official /models listing
While `models` equals the built-in catalog and the Messages origin is
https://api.deepseek.com, `deepseek-official` serves the official
`GET /models` listing, authenticated with the API key in `x-api-key`.
Loading, refresh, fallback, merging, and the client-version gate match
the account route: the first access waits up to `modelsTimeoutMs`, a
listing older than `modelsMaxAgeMs` refreshes in the background on the
next access, a failure keeps the last good listing or the built-in
catalog, and listed models this build cannot serve are refused before
network I/O.
A customized `models` list replaces the catalog and requests nothing.
Switching between a customized catalog and the listing discards the
cached listing, so Restore defaults reloads it on the next access.
Suites that boot the route on the official endpoint now answer the
listing themselves instead of reaching the network.
* docs: describe the official route model listing
Document when `deepseek-official` follows the official `/models`
listing, its timing fields, customization precedence, and the forced
reload after Restore defaults in the API-key README, the shared
transport README, and the provider guide. Record the decision in a new
Agent Note, keep the account note's statement of where the shared
listing code lives current, and regenerate the configuration catalog.
* test(llm-deepseek-api-key): pin the once-per-listing hidden-entry diagnostic
* docs: regenerate module and event graphs for the shared listing
* fix(llm-deepseek-api-key): report credential failures on the model request
On the official endpoint, `connect` waited for the listing view, whose
credential lookup rethrew a malformed key or a credential-store failure
before the agent loop recorded the prompt. A failed lookup now resolves
the connection from the current listing view, so `resolveAuth` reports
the failure on the model request and the turn keeps the prompt and the
failed attempt. A caller abort still rejects.
* docs(llm-deepseek-api-key): name which hidden listing entries are logged
* test: keep unit suites off the official model listing
Suites that boot the DeepSeek routes with a dummy or inherited key now
request `GET https://api.deepseek.com/models` on the official endpoint.
A unit-lane setup file rejects that request at once, so such a suite
serves the built-in catalog instead of reaching production or waiting
out the listing deadline on a network that never answers; suites that
exercise the listing answer `fetch` themselves. Other requests pass
through unchanged.
* feat(llm-deepseek): read tool_update from the model listing
Both DeepSeek routes now take a listed model's Messages tool update mode
from `api_capabilities.anthropic_messages.tool_update`, alongside the
system prompt mode. `in-history` and `addition-only` replace the
bundled mode; any other value reads as `leading-only` and removes it.
An absent or `null` mode keeps the bundled one, so a listing that does
not declare the field leaves `deepseek-flash` on `addition-only`.
`system_prompt_update: null` likewise keeps the bundled mode now; it
previously read as `leading-only`, which a serializer writing empty
values as null would have turned into a cache-unfriendly downgrade.
* fix(llm-deepseek): sync the built-in context window with the official listing
The official `/models` listing declares a 1,048,576-token context window
for `deepseek-flash` and `deepseek-v4-pro`; the built-in catalog said
1,000,000, a decimal-versus-binary mismatch. Both built-in entries now
carry the listed value, so offline starts and listing failures size the
context the same way the listing does. The Models page shows the exact
count for these rows, since 1,048,576 has no decimal K/M spelling.
`defaultContextWindow`, the fallback for model ids the catalog does not
describe, stays 1,000,000.
* test(llm-deepseek-api-key): reject the stubbed listing request with an Error
* test(cli): keep the built SDK smoke off the official model listing
The SDK profile's initialize now resolves the deepseek-official catalog,
which requests GET https://api.deepseek.com/models on the official
endpoint. With the smoke's fixture key that request answers 401 and the
route warns on stderr, so the test's empty-stderr assertion failed in the
e2e and snapshots lanes. Point the run at a loopback mock and assert it
received no model call.
* test(llm-deepseek): compose the malformed-key turn without the native executor
release/dsh-0.2.1 predates @deepseek-ai/dsh-tool-executor-native; its tool
runtime executes tools itself. Compose the official-route turn the way
account-routing.spec.ts does on this branch.
* fix(llm-deepseek-api-key): gate nothing when the credential lookup fails
The listing cache switches scope only after it reads a credential, so a
failed lookup left `connect` serving the previous credential's listing.
After a key whose listing refuses a model was replaced by a malformed one,
`admit` refused that model with CLIENT_UPGRADE_REQUIRED before the turn
recorded the prompt, instead of `resolveAuth` reporting the credential
error on the request. Serve the built-in catalog without listing gates
when the lookup fails.
* test(llm-deepseek-api-key): pin the once-per-listing diagnostic across request preparation
The hidden-entry diagnostic test repeated the same discovery assertion to
prove a second pass reports nothing new, which read as a duplicate. Assert
the single warning after the request preparations instead; they resolve
the same listing, so dropping the per-listing deduplication still fails
the test.
* docs(llm-deepseek-api-key): note that a list matching an earlier built-in catalog counts as customized
Customization is judged against the running version's built-in catalog,
so a saved `models` list equal to an earlier version's catalog stops
following the listing once the built-in catalog changes, until Restore
defaults. Record the consequence in the Agent Note and the README's known
limitations.
* fix(ui): separate navigation pins from selection and show menu icons
* fix(ui): simplify More menus and fold conversation views on resize
* test(ui): fix navigation CI regressions and refresh catalogs
* refactor(ui): render sidebar panel icons directly
* fix(ui): keep Chat visible and stop persisting navigation pins
* refactor(ui): drop unreachable pin validation from in-memory stores
Review found two faults in the endpoint and configuration checks. The
providers took the official chat route's endpoint from the first active
dsh-llm-deepseek-api-key Loader row, so a composition that isolates several
instances answered for an unrelated one: a correct route lost search, or a
gateway's key reached DeepSeek. And a key saved on the Web search settings
page lands under the default DEEPSEEK_API_KEY reference, so the inference
that search had its own configuration never saw it.
Both DeepSeek web packages now serve only the deepseek-account and
deepseek-official routes, whatever key they are configured with, and no
longer compare the chat endpoint with their own. ready() checks the route
and then credential presence as before; the API-key resolver repeats the
route check and refuses with WEB_PROVIDER_ROUTE_DISABLED. The packages no
longer read Loader rows or depend on dsh-llm-deepseek-api-key, so the
lockfile, the module graph, and the keyless smoke expectations that the
endpoint check had changed return to master's.
An upgrade guide covers conversations on other providers' models, which
lose DeepSeek web search and, with the Search and Fetch APIs selected,
web_fetch.
Replace the FadeText measuring component with a self scroll timeline: it is
active only while a box overflows, so the end mask applies to clipped text
alone. Browsers without scroll-driven animations keep the ellipsis.
Model and effort text in the composer trigger, root menu values, and option
rows now clips and fades over its last 24px while it overflows, following the
measured-clip mask used by dockkit tab titles and PathLabel.
Profile templates and the default, optional, on-demand, retired, and
installation-owned bundle lists move to the new data-only package
@deepseek-ai/dsh-official-bundles, so editing a bundle list no longer
touches app-boot.
Store a frozen copy of ThemeDefinition.icons, treat null as absent,
require replacement element ids under the symbol id, document the trust
level and ignored root attributes, and boot a theme plugin through the
Loader to check the sprite swaps and restores icons.
* feat(ui-user-questions): show answered batches as shared message bubbles
* refactor(ui-primitives): share clipboard confirmation lifecycle
* test(web): include answered question bubbles in steering goldens
* fix(ui-user-questions): keep answered turns collapsible
* test(ui-user-questions): drop the removed compactAnswer expectation
master removed ChatTurnProcessPresentation.compactAnswer in aaeb344
("fix(chat): keep the reply gap on a folded final answer"); reply spacing
now comes from the adjacent-row rules. The rebase left this assertion
behind, so the parametrized replay/live/prepend cases failed on every CI
coverage lane even though typecheck stayed green: toMatchObject accepts
the stale property.
* fix(ui-user-questions): address answer bubble review feedback
* test(web): observe file card styles after both cards mount
---------
Co-authored-by: imccyu <[email protected]>
The /api/file route bounds files by maxImageBytes, whose default is now
50 MiB, so the 20 MiB + 1 byte fixture no longer exceeded it and the
route served it with 200 instead of 413.
Linux CI lays the title-only header at 470px with the actions beside the
title, while macOS wraps them, so that width depends on the platform
font. The title-only case now records 1280, 600, and 390px; the tabs case
keeps all four widths.