v0.4.68
18
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Miles WardandClaude Opus 4.8
|
2f12a2ae84 |
v0.4.68: fix NFS secure-export mount, logo cache-bust, dashboard disk card, NFS form spacing
Four operator-reported issues from v0.4.67 validation. ## 1. NFS MNT3ERR_ACCES even with the host IP allow-listed Root cause: Linux kernel nfsd (what UniFi UNAS / Synology / TrueNAS all run underneath) exports with the `secure` option by default, which only accepts mount/NFS requests from a privileged source port (<1024). v0.4.67 explicitly connected from a non-privileged port on the mistaken assumption that uid 10001 can't bind low ports — but the binary carries CAP_NET_BIND_SERVICE (granted via setcap for the DHCP/TFTP/HTTP low-port binds), which also covers privileged *source* ports for outbound connects. Fix: build_connection now tries a privileged source port first (the common case for every appliance NAS), then falls back to a non-privileged port for `insecure` exports or capability-less environments. Each attempt has its own connect timeout; a timeout on the first attempt skips the fallback (the server isn't answering — a retry would just double the wait). Also: hint_for now recognizes MNT3ERR_ACCES distinctly from NFS3ERR_ACCES and explains both the allow-list and the secure/insecure angle, with the UniFi /var/nfs/shared/<share> path convention called out. ## 2. Custom logo didn't update the top-left brand mark The brand <img> and favicon were pinned to ?v=<app-version>, which only changes on upgrade — so uploading a new logo left the cached bundled SVG in place. Added a monotonic `rev` counter to BrandingStore that bumps on every set/clear, persisted across restarts, surfaced through index_html as an extra &r=<rev> cache-bust token on the brand mark + favicon URLs. Since index.html is served no-cache, the fresh token lands on the next reload after upload and the new logo appears immediately. (Note: this updates the WebUI brand mark. The PXE *boot menu* still shows the ASCII wordmark — painting the operator's PNG there needs the IMAGE_PNG-enabled iPXE rebuild that remains queued for native x86_64 hardware. The /branding/pxe-logo compositor is ready for when it lands.) ## 3. Disk-space card on the Dashboard Extracted the Storage tab's disk card into a shared diskSpaceCard(disk) helper and added it to the Dashboard grid under the stat strip. Dashboard fetches /api/storage/disk with the same graceful-degradation fallback the Storage tab uses. ## 4. NFS "Add share" button touching the form field The NFS card has a single form row (vs SMB's two), so the button butted right against it. Added margin-top:14px to match SMB's effective spacing. Tests: 162 passing (+2 — logo_rev bump, MNT3ERR_ACCES hint). clippy clean. Co-Authored-By: Claude Opus 4.8 (1M context) <[email protected]> |
||
|
Miles WardandClaude Opus 4.7
|
3f9d8568f0 |
v0.4.67: NFSv3 alongside SMB (in-process via nfs3_client crate)
NFS is back — done right this time. v0.4.67 ships a pure-Rust NFSv3
client (`nfs3_client` 0.9 from the xetdata/Vaiz crate family) running
in-process inside the openpxe binary. No `mount.nfs`, no kernel
modules, no `CAP_SYS_ADMIN`, no subprocess. Works in every container
that the v0.4.65 SMB path works in (Unraid included).
The v0.4.65 SMB path stays as-is. Operators get both protocols
side-by-side and pick whichever their NAS prefers — or use both
together. NFSv3 has one architectural advantage over the SMB
userspace path: HTTP Range requests work for NFS-sourced ISOs
because NFSv3 READ3 takes an explicit offset. SMB-sourced ISOs still
return 416 for ranges (smbclient CLI can't seek mid-stream).
## What's new
- `crates/iso-store/src/nfs_share.rs` — `NfsShareManager` mirroring
`SmbShareManager` structurally. Lists ISOs via READDIR3+LOOKUP3+
GETATTR3, streams files via READ3 in 64 KiB chunks piped to axum
body streams. Uses `connect_from_privileged_port(false)` because
the openpxe binary runs as uid 10001 — most modern NFS servers
allow that; a server that demands privileged ports needs
`insecure` in /etc/exports, and the hint translation calls that
out specifically.
- `IsoSource::Nfs { share_id, relative_path }` variant alongside the
existing `Smb`. `IsoStore::iso_path_for` returns None for both;
the HTTP handler dispatches to the right share manager.
- `/api/nfs-shares` CRUD + scan endpoints, parallel to
`/api/smb-shares`. `POST` body: `{ server, export, port? }`.
- `nfs` terminal command back (this time as in-process, not kernel
mount): `list | add <srv>:<export> [port] | remove | scan`. The
v0.4.64 `nfs` command name pointing at kernel mount is moot
history — same name, completely different mechanism.
- Storage tab: a new NFS shares card sits directly below the SMB
shares card. The form is simpler (no auth fields) since NFSv3
uses AUTH_SYS and access is gated server-side by client IP.
- Dashboard "Images available" tile sums SMB + NFS reachable shares
into a generic "N remote shares" line.
## What's the same
- The structured `{error, stderr, hint}` JSON shape on failures
matches the SMB API exactly, so the UI's error banner renders
identically.
- Hint translation: NFS3ERR_ACCES → "exports list", NFS3ERR_NOENT →
"export path doesn't exist", `mount denied` → "/etc/exports may
need `insecure`", timeouts → "check IP/port/firewall".
- Persistence: `<work_dir>/nfs_shares.json`. No conflict with the
long-dead v0.4.64 `nfs.json`.
## Why nfs3_client
User picked it: pure-Rust matches the architecture, NFSv3 covers the
real-world cases, AUTH_SYS keeps the UI simple. The crate is at
0.9.0, MIT/Unlicense, rust-version 1.88 (we're on 1.95). Tokio
feature flag enabled. Image size unchanged at compile time — single
musl static binary, no extra OS packages.
## Tests
160 passing (was 150 in v0.4.66, +10):
- nfs_share parser: stable share ids, server normalization (smb://,
cifs://, \\, // all stripped).
- hint_for(): NFS3ERR_ACCES, NFS3ERR_NOENT, mount denied, unknown.
- status_label() covers the common nfsstat3 codes.
- HTTP integration: nfs-shares list starts empty, missing server
rejected, export without leading slash rejected.
`cargo clippy --workspace --all-targets -- -D warnings` clean.
Co-Authored-By: Claude Opus 4.7 (1M context) <[email protected]>
|
||
|
Miles WardandClaude Opus 4.7
|
900b65b3ec |
v0.4.65: swap kernel-mount NFS for userspace SMB (smbclient)
v0.4.64's NFS path didn't work on Unraid even with --privileged
because Unraid's base kernel ships without the nfs/nfsv4 client
modules — and no container-side configuration can load a host kernel
module. SMB has the same kernel-mount problem (`mount -t cifs` needs
the cifs module) but it also has a usable *userspace* client: Samba's
`smbclient` CLI, which speaks the SMB protocol over a plain TCP socket
with no kernel involvement. This is the same approach Bootimus uses,
and works in every container regardless of host kernel modules or
container capabilities.
What's gone:
* `crates/iso-store/src/nfs.rs` (in entirety)
* `NfsManager`, `NfsMount`, `NfsAddRequest`, `NfsVersion` types
* `IsoSource::Nfs` variant
* `IsoStore::nfs_root` / `IsoStore::set_nfs_root`
* `/api/nfs`, `/api/nfs/:id`, `/api/nfs/:id/scan` routes
* `nfs` terminal command
* Storage tab's NFS shares card and the v0.4.64 fstab-options
diagnostics work (the whole error path is moot now)
What's new:
* `crates/iso-store/src/smb_share.rs` — `SmbShareManager` that drives
`smbclient` as a subprocess. Indexes shares via `smbclient -c "ls
*.iso"` and streams files via `smbclient -c "get file -"` piped
straight into HTTP response bodies. No local cache, no double disk
usage.
* `IsoSource::Smb { share_id, relative_path }` variant.
* `IsoStore::iso_path_for` returns None for SMB sources — the HTTP
ISO download handler dispatches on the source kind and streams via
the SmbShareManager when it's SMB.
* `/api/smb-shares` + `/api/smb-shares/:id` + `/api/smb-shares/:id/scan`
routes.
* `share` terminal command (`list | add //srv/share [auth] | remove |
scan`). Auth spec is `guest` or `user:password`.
* Storage tab: SMB shares card replaces the NFS one. Two-column form
for server + share name, three-column form for guest checkbox /
username / password. Username and password fields auto-disable when
Guest is checked.
* Credentials live under <work_dir>/smb_creds/<id>.cred at 0600
permissions so they don't leak through `ps`. Persisted state at
<work_dir>/smb_shares.json (sans password — re-entered on add /
re-scan).
Why subprocess and not a Rust crate:
* The Debian runtime image already ships the `samba` package
(Dockerfile line 84) — `smbclient` is right there.
* Library options (pavao, etc.) wrap libsmbclient so they still pull
in the same C library at runtime.
* Subprocess gives operators a verifiable mental model — anything
OpenPXE can do over SMB, they can reproduce by running `smbclient`
manually at a shell.
Range-request limitation, called out in the smb_share.rs module docs
and the UI explainer: `smbclient -c 'get file -'` is a sequential
whole-file stream. HTTP range requests on SMB-sourced ISOs return
416. PXE workloads (iPXE chain, casper sanboot, wimboot) do
whole-file sequential reads, so this works in practice. A follow-up
release can add libsmbclient-based seek if a real workload needs it.
Stderr-to-hint translation patterns mirror v0.4.64's NFS work:
NT_STATUS_LOGON_FAILURE → "check credentials", BAD_NETWORK_NAME →
"check share name", connection refused / timeout → "verify
reachability + firewall", etc. UI renders the raw smbclient error
plus the hint as two lines.
Tests (149 total, was 142 in v0.4.64):
* smb_share parser tests covering ISO + skipped directory, filenames
with spaces, non-ISO filtering.
* hint_for() translation tests for the dominant NT_STATUS codes.
* Server normalization (smb://, cifs://, \\, // prefixes all stripped).
* HTTP integration: shares list starts empty, invalid server / missing
username / path in share name all rejected with actionable hints.
`cargo clippy --workspace --all-targets -- -D warnings` clean.
Co-Authored-By: Claude Opus 4.7 (1M context) <[email protected]>
|
||
|
Miles Ward
|
07e7c18698 |
Revert "v0.4.65: Local directory ISO source (bind-mount workaround for Unraid)"
This reverts commit
|
||
|
Miles WardandClaude Opus 4.7
|
761489761c |
v0.4.65: Local directory ISO source (bind-mount workaround for Unraid)
Field report: even with CAP_SYS_ADMIN and full --privileged, NFS mounts
inside the OpenPXE container fail on Unraid with the same
"failed to apply fstab options" error v0.4.64 added diagnostics for.
The root cause is the host kernel: Unraid's base kernel ships without
the nfs/nfsv4 client modules loaded. Capabilities are necessary but
not sufficient; the modules have to be present on the host kernel for
in-container mount(2) to do anything. No container-side change can
fix that.
This is exactly the case every other PXE/imaging tool sidesteps
(Bootimus uses SMB; iVentoy, FOG, MAAS, Cobbler all rely on the host
to mount network storage and bind-mount the path into the imaging
service). v0.4.65 brings OpenPXE in line with that pattern.
What's new:
* `IsoSource::LocalDir { dir_id, relative_path }` — third source kind
alongside `Local` (uploaded) and `Nfs` (in-container mount).
* `LocalDirManager` (crates/iso-store/src/local_dir.rs) — registers
bind-mounted directories, validates them (absolute path, exists, is
a directory, readable), scans for *.iso files, registers them with
IsoStore. Persisted to <work_dir>/local_dirs.json so the relationship
survives restarts.
* `NfsHostCaps::detect()` — pure read of /proc/filesystems on startup.
Surfaced via GET /api/nfs/capabilities and used by the Storage tab to
show a prominent red banner above the NFS form when in-container
mounts cannot possibly work, pointing the operator at the Local
Directories card as the recommended path.
* Four new API routes:
GET /api/nfs/capabilities
GET /api/local-dirs
POST /api/local-dirs { path, label? }
DELETE /api/local-dirs/:id
POST /api/local-dirs/:id/scan
UI changes (crates/webui/src/app.js):
* Storage tab: new "Local directories" card under the NFS card with
the bind-mount form, an explainer paragraph (with the Docker
`-v /mnt/user/isos:/mnt/external-isos` command), and the list of
registered directories with rescan + remove actions.
* When NFS host caps are unavailable, the NFS card sprouts a red
banner explaining what's wrong and pointing at the local-dir
workaround. The card sub-header also flips to "N registered ·
recommended on this host".
* ISO table: new "dir:<id>" source badge; on-disk ISOs show "on disk"
in the actions column instead of a delete button (same pattern as
NFS — OpenPXE doesn't own those bytes).
* API reference table picks up the four new endpoints + a hint about
the new `port` field on NFS add.
Tests (+12, total 162):
* iso-store: 7 local_dir unit tests covering relative-path rejection,
missing path, non-directory file, empty-directory success, default
label, idempotent re-add, remove + iso-path-resolution clear.
* iso-store: 1 nfs unit test confirming NfsHostCaps::detect() never
panics and the boolean accessors are consistent.
* http-api: 4 integration tests covering /api/nfs/capabilities,
/api/local-dirs list/add/remove + relative-path 400.
`cargo clippy --workspace --all-targets -- -D warnings` clean.
Co-Authored-By: Claude Opus 4.7 (1M context) <[email protected]>
|
||
|
Miles WardandClaude Opus 4.7
|
0afbe860e8 |
v0.4.64: NFS mount diagnostics — pre-flight probe, retry, hint translation
The dominant field failure from v0.4.63 was "mount.nfs: failed to apply
fstab options" (exit 32), surfaced verbatim by the Storage tab. The
message is misleading — it has nothing to do with /etc/fstab; it comes
from nfs-utils 2.6.x's nfs_options2string() and most commonly indicates
the container is missing CAP_SYS_ADMIN, /etc/mtab is unwritable, or an
auxiliary option triggered an option-transform edge case.
Backend (crates/iso-store/src/nfs.rs):
- TCP pre-flight probe to server:port (4s timeout) before shelling out.
Catches wrong-IP / firewall cases as "cannot reach NFS port" instead
of letting mount.nfs spit out an unhelpful message.
- proto=tcp explicit on NFSv3 (UDP is widely deprecated, modern NAS
appliances often don't bind UDP at all).
- Optional `port` field on NfsAddRequest (defaults to 2049), persisted
on NfsMount.
- On "failed to apply fstab options" / "internal option parsing error"
retry with a minimal option set (vers=N,ro/rw only) — bypasses the
nfs-utils transformation bug; if it still fails we get a real kernel
error to translate.
- hint_for() translates well-known stderr patterns into actionable
guidance — CAP_SYS_ADMIN for option-transform failures, exports-table
for access-denied, export-path hint for "no such file or directory"
(calling out the UniFi UNAS Pro /var/nfs/shared/<name> convention),
etc.
- normalize_server() strips http://, https://, nfs:// schemes the
operator may have pasted by mistake, plus trailing slashes.
API (crates/http-api/src/app.rs):
- api_nfs_add now returns a structured {error, stderr, hint} JSON body
on failure instead of plain text. UI renders the error in bold with
the hint as a dimmer second line.
UI (crates/webui/src/app.js):
- Storage tab's "Mount failed" banner now shows the raw error + hint on
two lines. Each persisted mount row also surfaces last_hint under
last_error.
Terminal (crates/http-api/src/terminal.rs):
- `nfs mount` command prints "hint: ..." on a follow-up line when the
manager returns one.
Tests:
- 8 new tests covering option string (incl. proto=tcp on v3, port=N for
non-default), minimal-options stripping, server normalization, and
hint translation for each well-known stderr pattern.
- All 150 tests pass; clippy -D warnings clean.
Co-Authored-By: Claude Opus 4.7 (1M context) <[email protected]>
|
||
|
Miles WardandClaude Opus 4.7
|
d729a7ae2f |
v0.4.62: ship the v0.4.61 cache fix as a buildable image
v0.4.61 source landed in main with the cache fix and the PXE-logo compositor, plus an aspirational Dockerfile stage that rebuilds iPXE from source with IMAGE_PNG enabled. The Dockerfile stage hits intermittent `cc1: internal compiler error: Segmentation fault` when cross-emulating x86_64 gcc under QEMU on arm64 build hosts, which is what the build host I was using does. No v0.4.61 image was ever published as a result. v0.4.62 walks back the iPXE-from-source change and ships a working image with the same cache fix and the same compositor code in place. The iPXE rebuild is queued for a follow-up release, to be built and validated on the actual x86_64 Unraid hardware where the QEMU instability doesn't apply. What's in v0.4.62 vs v0.4.6: - Asset URL versioning: index.html now appends `?v=<openpxe-version>` to every asset URL (app.css, app.js, logo.svg). Combined with `Cache-Control: no-cache, must-revalidate` on the asset handlers, upgrades land in operators' browsers without a hard refresh. This is the fix for "I pulled v0.4.6 but the UI still looks like v0.4.5". - New PXE-logo compositor in iso-store::pxe_logo: decodes any raster the operator uploads, scales-to-fit into a 600×200 bounding box, pastes it centered at the top of a 1024×768 PNG canvas, and serves the result at GET /branding/pxe-logo. Wired into render_menu's `console --picture` directive; takes effect when the shipped iPXE binaries grow PNG support. - ASCII OpenPXE wordmark in render_menu retained for v0.4.62 — works on the boot.ipxe.org pre-builds we currently ship. Quality: - 142 tests passing. - cargo clippy --workspace --all-targets clean. - No image dependency change since v0.4.61 (the `image = "0.25"` dep added in v0.4.61 stays — it backs the compositor). Co-Authored-By: Claude Opus 4.7 (1M context) <[email protected]> |
||
|
Miles WardandClaude Opus 4.7
|
1419309a2d |
v0.4.61: asset cache fix, PNG-enabled iPXE, composed PXE logo
Two real issues v0.4.6 left on the table: Asset caching: - index.html now interpolates the running OpenPXE version into every asset URL as `?v=<version>` (app.css, app.js, logo.svg). Combined with `Cache-Control: no-cache, must-revalidate` on the asset handlers, browsers and intermediary proxies are forced to fetch fresh on every upgrade. Without this, last release's bundled JS kept serving the old UI even after the operator pulled the new image — invisible to anyone who only checks the version chip in the footer (which is dynamic). - The Cache-Control header is also applied to logo.svg and loader.svg so a logo upload reflects immediately rather than after a hard refresh. Real-image PXE menu logo (matches iVentoy now): - New Dockerfile stage `ipxe-build` clones the iPXE source and compiles all four binaries (undionly.kpxe, snponly.efi for x86_64/i386, snponly.efi for arm64 via gcc-aarch64-linux-gnu) with IMAGE_PNG + CONSOLE_FRAMEBUFFER + CONSOLE_VESAFB enabled. Replaces the boot.ipxe.org fetch — those binaries are built without PNG support, which is why v0.4.6's `console --picture` line silently no-op'd. - `iso-store::pxe_logo::compose_pxe_logo` decodes any operator upload (PNG / JPEG / WebP / GIF), downscales-to-fit if larger than 600×200, and pastes it onto a transparent 1024×768 canvas centered horizontally with a 64-pixel top margin. iPXE paints the result at 1:1 on the typical VESA framebuffer, giving the iVentoy-style centered-logo look regardless of the operator's source dimensions. - GET /branding/pxe-logo now returns the composed PNG. wimboot still fetches from ipxe/wimboot's GitHub release (separately signed). - Dropped the ASCII OpenPXE wordmark from render_menu — once the real image paints, the banner would duplicate it visually. iPXE builds without PNG (none of ours after this release, but a third- party undionly might) simply show the menu without a logo, which is the right graceful-degradation outcome. Quality: - 142 tests passing (was 138 in v0.4.6): +4 pxe_logo unit tests covering canvas dimensions, centered-top placement, oversize downscale, and unsupported-bytes error handling; existing integration tests updated to verify the 1024×768 IHDR header from the composed PNG instead of round-tripping the raw upload. - cargo clippy --workspace --all-targets clean. - Image dependency: `image = "0.25"` with only `png/jpeg/webp/gif` features enabled. No new transitive C deps. Co-Authored-By: Claude Opus 4.7 (1M context) <[email protected]> |
||
|
Miles WardandClaude Opus 4.7
|
55f4765a20 |
v0.4.6: iVentoy-style PXE menu, top-right user menu, Settings touchups
PXE boot menu polish (iVentoy-inspired):
- render_menu now opens with a best-effort `console --picture
<base>/branding/pxe-logo || console` line so iPXE builds with PNG
support paint the operator's uploaded raster logo as the background.
- ASCII OpenPXE wordmark banner sits at the top of the menu in
`item --gap` lines — always visible on every iPXE build, including
the snponly/undionly variants without graphics console.
- New footer line above `choose`: "OpenPXE v0.4.6 - <arch label>",
where <arch label> is mapped from iPXE's ${buildarch}/${platform}
to "x86 BIOS", "x86_64 UEFI", or "arm64 UEFI". No URL, per brief.
- New GET /branding/pxe-logo route serves the operator's PNG / JPEG /
WebP / GIF as-is for iPXE to consume. SVG uploads 404 here (iPXE
can't rasterize SVG) — the always-visible ASCII wordmark stands in.
Route stays public after admin setup so iPXE clients (no cookies)
can fetch it.
UI:
- Removed the bottom-left "signed in as / Sign out" row.
- Added a person-icon button next to the theme toggle in the topbar.
Click opens a small popover with: Name (display only), Edit account
(jumps to Settings), Sign out. Esc + click-outside close it.
- Settings → Account card form chrome made consistent. The previous
`label.field` selector only styled type=text/number, leaving
password inputs with default browser chrome. Switched to a
negation-list selector that covers every typed input we use, plus
-webkit-appearance:none + a 1px focus ring. Light + dark mode both
show the same border/padding/focus state across all four account
fields.
- Settings → SSO card now renders display name, IdP logo URL (new),
and metadata source on one 3-column row. The metadata <select>
inherits the same chrome as the text inputs so it baseline-aligns
with them. SsoConfig grew an idp_logo_url field, persisted to
sso.json, length-capped and validated to http(s) only.
Quality:
- 138 tests passing (was 132 in v0.4.5). +1 IdP-logo-URL validation,
+1 PXE menu polish regression guard, +4 /branding/pxe-logo
integration tests covering missing-config / SVG-fallback / raster-
serve / post-auth public-allowlist cases.
- cargo clippy --workspace --all-targets clean.
Co-Authored-By: Claude Opus 4.7 (1M context) <[email protected]>
|
||
|
Miles WardandClaude Opus 4.7
|
a1518110ed |
v0.4.5: VMware UEFI fix, static musl binary, Forms auth + SSO config
VMware UEFI / Casper boot fix:
- Linux cmdline for Debian/Ubuntu/Mint/Pop!_OS/elementary now uses the
canonical Casper `iso-url=` option and `ds=nocloud`, matching the
fix Bootimus shipped in v0.1.67. The previous
`boot=casper netboot=url url=… ip=dhcp ---` form booted fine on
bare-metal UEFI but hung at "cloud-init running" on VMware guests
because subiquity / cloud-init can't reach a metadata datasource
through PXE.
Static binary (matches Bootimus v0.1.70):
- Dockerfile build stage now compiles against
x86_64-unknown-linux-musl. The resulting /openpxe has no glibc
dependency at all; the runtime stage still ships Debian slim for the
samba/wimtools/nfs-common shellouts, but a future scratch/distroless
variant is now a one-line swap. Cuts a class of "GLIBC_2.39 not
found" surprises on older RHEL/Rocky hosts.
Forms auth (Sonarr/Radarr-style):
- New AdminStore in openpxe-core: single admin record persisted to
<work_dir>/auth.json, bcrypt-hashed credentials, rotation requires
current password.
- New SessionStore in openpxe-http-api: in-memory UUID-keyed sessions
with 24h sliding TTL, openpxe_session HttpOnly cookie.
- Endpoints: POST /api/setup (first-run), POST /api/login, POST
/api/logout, GET /api/me, PUT /api/me/credentials (rotates and
revokes every other session).
- Auth middleware gates /api/* once the admin is configured;
passes through entirely until then (tests + fresh installs ride this
path). Allowlists PXE-essential paths (/boot.ipxe, /iso/*, /ipxe/*,
/api/queue/join, /api/queue/poll/*) so iPXE clients still work
without a cookie they can't send.
- WebUI: first-run setup card, login card, logout chip in the sidebar
footer, Account card in Settings for rotating creds. Auth screen is
fully styled (centered narrow card, matches Sonarr layout).
SSO config (FleetDM-shaped, storage-only):
- New SsoStore in openpxe-core: { enabled, idp_name, metadata,
metadata_url } persisted to <work_dir>/sso.json with size caps and
URL-scheme validation.
- Endpoints: GET /api/sso, PUT /api/sso. Validation: enabling SSO
without either metadata or metadata_url returns 400.
- WebUI: SSO card in Settings with a URL-vs-XML mode switch and an
inert "Sign in with X" button on the login screen while runtime
flow is pending. Per the brief: no Entity ID field (defaults to the
advertised public_base_url internally when SAML wiring lands).
Quality:
- 132 tests passing (was 106 in v0.4.4): +5 auth unit tests, +5 SSO
unit tests, +7 auth integration tests, +1 SSO integration test, +1
regression guard pinning the new Casper cmdline.
- cargo clippy --workspace --all-targets clean.
Co-Authored-By: Claude Opus 4.7 (1M context) <[email protected]>
|
||
|
Miles WardandClaude Opus 4.7
|
7b972dc049 |
v0.4.4: Settings tab, API reference, ISO category, branding, disk space
Settings:
- New top-level Settings tab. Carries a placeholder for the planned
LDAP / OIDC / user-management work, the new branding controls, and
the API reference at the bottom.
- Custom logo upload (PNG/SVG/JPEG/WebP/GIF up to 2 MB) replaces the
bundled brand mark via /assets/logo.svg; bytes live at
<work_dir>/branding/ and survive restart. The original "OpenPXE
v<x.y.z>" pins to the sidebar footer for support.
- API reference rendered from a new GET /api/docs into a per-method
coloured pill list grouped by area.
ISO category (Storage):
- New IsoCategory { Os, Tools } on IsoMeta with PUT
/api/isos/:id/category. Storage table's Type cell becomes a
dropdown; selecting Tools moves the ISO into the Tools submenu next
to memtest / shell / NIC info and removes it from the OS Installers
family submenu. Family detection still drives BIOS/UEFI / kernel
args; only the menu placement changes.
Storage telemetry:
- New IsoStore::disk_usage (libc::statvfs, lives in iso-store so the
http-api crate stays #![forbid(unsafe_code)]) and GET
/api/storage/disk. The Storage tab now shows free/used/total for
the volume hosting the ISO directory with an 80%/95% colour ramp.
UI polish:
- Brand block in the sidebar now matches the topbar height exactly,
so the divider runs straight across the top of the app rather than
stepping; version label moved out of the brand and pinned to the
sidebar footer ("OpenPXE v0.4.4").
- Light-mode terminal: --terminal-bg + per-level text colours track
the active theme rather than being hard-coded dark.
- About: lead paragraph spans the full content width; new Docs row
links to https://openpxe.com/.
106 tests passing (was 89 in v0.4.1, +17 across branding unit tests
and new integration coverage for category / disk / docs / branding).
cargo clippy --workspace --all-targets clean.
Co-Authored-By: Claude Opus 4.7 (1M context) <[email protected]>
|
||
|
Miles Ward
|
2c1c80a7ca |
v0.4.1: harden ISO uploads and beta UI polish
Add browser-safe chunked ISO uploads with progress, partial-file visibility, offset validation, and abort cleanup while keeping the legacy multipart endpoint for API clients. Record host-log validation coverage, keep the queue/status UI copy clean, move release docs to 0.4.1, and tighten the dark theme to a near-black Netbox-style palette. |
||
|
Miles WardandClaude Opus 4.7
|
ec171ede47 |
v0.4.0: upload telemetry, host log, jet-black UI
- Upload reliability + diagnostics:
- api_upload_iso now distinguishes clean EOF from mid-stream errors;
a truncated multipart body (proxy buffer cap, network drop) returns
400 with the cause and a "try the LAN IP" hint instead of silently
finalising a partial file.
- Per-stage tracing (begin/MB-watermark/finish/abort) so a stuck
upload is debuggable from the Terminal tab.
- Web upload UI surfaces bytes/total, percent, throughput, ETA, and
maps 413/502/504/network-drop to actionable hints.
- New BootLog feature under Hosts:
- openpxe-core::BootLog — bounded in-memory ring (500) + append-only
JSONL on disk, recording (timestamp, mac, ip, target_id,
target_title) every time a boot entry script is served.
- iPXE per-entry chain URLs grow ?mac=${mac}; password prompt
submission carries it through; host-binding short-circuit uses the
bound MAC. ConnectInfo<SocketAddr> wired for peer IP capture (with
optional fallback so tower::oneshot in tests still works).
- GET /api/boot-log endpoint + Host log table under the Hosts tab.
- UI changes:
- Queue card header "Forge" → "Status".
- Removed Tinkerbell attribution sentence from Hosts tab.
- Topbar readiness chip moved into the sidebar footer as
"Service status: Ready / Advertised to clients / <url>", grouping
advertised PXE URL with operator-relevant status.
- Jet-black dark palette (#000 / #0a0a0a / #141414 / #1c1c1c)
replacing the blue-tinted ramp; terminal toolbar/input recoloured
to match.
- 89 tests passing (was 85 in v0.3.2); cargo clippy --workspace
--all-targets clean.
Co-Authored-By: Claude Opus 4.7 (1M context) <[email protected]>
|
||
|
Miles Ward
|
115ba779da | Name update | ||
|
Miles Ward
|
91848e02e3 |
v0.3.1: per-ISO boot password gate
Operators can now lock individual ISOs behind a password set in the
WebUI. Picking a locked image at the PXE menu prompts the operator on
the client console; the boot script is only released after a correct
match. The plaintext never leaves the request — server stores bcrypt
hashes, scripts never echo the candidate.
## Backend
- New optional `password_hash: Option<String>` on `IsoMeta`. Skipped
during serialize when None, so existing meta.json files don't grow
a noisy `null` field.
- `IsoStore::set_password(id, Some("pw"))` hashes via bcrypt
`DEFAULT_COST` (10 — fast enough for an interactive iPXE prompt,
expensive enough to be hostile to brute force on a leaked
meta.json). `set_password(id, None)` and `set_password(id, Some(""))`
both clear.
- `IsoStore::verify_password` returns Ok(true) when no password is
set, so the gate stays open for the common case.
- `IsoMeta::is_password_protected()` predicate the HTTP layer + UI
share.
- NFS-sourced ISOs persist their hash in memory only — the share is
the source of truth for those, and it doesn't carry hash sidecars.
## HTTP API
- `PUT /api/isos/:id/password` body `{ "password": "..." }` to set,
`{ "password": null }` (or empty string) to clear.
- `DELETE /api/isos/:id/password` for the explicit clear.
- Both 204 on success, 404 for unknown ids.
- `/boot/<entry>.ipxe` now intercepts:
- no `?token=` -> render password-prompt script
- `?token=<wrong>` -> render auth-fail script (sleeps 2s, chains
back to the entry which re-prompts)
- `?token=<correct>` -> render the real boot script
- ISO without password ignores token entirely (per-MAC bookmarks
still work without changes).
## iPXE prompt
`render_password_prompt`:
- `set password ` then `read --secret password` — accepts input
without echoing.
- Empty input chains back to the main menu (lets the operator back
out of a misclick).
- Submit chains `?token=${password:uristring}`. The `:uristring`
modifier URL-encodes the value, so passwords with `&`, `?`, `=`,
spaces, etc. survive transport.
`render_password_failed`:
- Single line saying so + 2s sleep, then re-chains the entry.
- Server-side WARN log records the entry id only, never the
candidate value (verified in smoke test).
## UI
Storage tab's image table grows an `Auth` column showing
`protected` / `open`, plus a 🔒 next to the filename when locked.
Per-row "Set password" / "Password ✎" button toggles an inline
editor in the next table row containing:
- a "Password protect this image" checkbox
- a `<input type=password autocomplete=new-password>` (hidden when
the checkbox is off)
- a Save button
Save calls PUT or DELETE on `/api/isos/:id/password` based on the
checkbox state and clears the input field before re-rendering, so
the plaintext doesn't sit in the DOM longer than needed.
## Menu indicator
`render_family_menu` adds a `*` prefix immediately before the size
box on protected entries — ASCII only because some firmware menu
consoles mangle non-ASCII glyphs. Looks like:
item --key 1 win11_test-winpe *[ 5234 MB] Windows 11 Test ISO
## Tests
74 passing across the workspace (was 66 in v0.3.0):
- 3 new store unit tests (bcrypt round-trip, unknown-id error,
meta.json persistence across restart)
- 2 new ipxe_script unit tests (prompt/auth-fail invariants:
read --secret, uristring, no candidate echo)
- 3 new HTTP integration tests (full gate flow upload-set-prompt-
fail-success-clear, null/empty bodies, 404 on unknown id)
cargo clippy --workspace --all-targets clean.
Local smoke verified upload + lock + prompt + auth-fail + correct +
menu indicator + log scrub on a real release binary.
## Operational notes
- HTTP, not HTTPS — token rides in the query string. Acceptable on
a trusted boot VLAN; do NOT expose OpenPXE to untrusted networks
with this feature relied on for security. Reverse-proxy in front
of OpenPXE will end up with the token in access logs.
- bcrypt cost is `DEFAULT_COST` (10). One verify takes ~50ms on
modern x86, which is the worst-case latency added to a correct
boot. Tunable via the bcrypt crate if needed.
|
||
|
Miles Ward
|
20c585e3ed | Name update | ||
|
Miles Ward
|
49d0b00a8a |
v0.2.0 — pre-beta: per-MAC bindings, /metrics, themes, animated forge
This is the bulk pre-beta cleanup pass. Bumps the workspace to 0.2.0.
Test count is 56 -> 66 (+10), clippy is fully clean across the
workspace (was several dozen warnings).
## New features
**Per-MAC host bindings** (Tinkerbell smee pattern). New
`HostBindings` registry maps a MAC -> preferred boot target, persisted
to <work_dir>/hosts.json. The DHCP reply now embeds `?mac=${mac}` in
the boot.ipxe URL; iPXE substitutes the literal MAC client-side, so
the HTTP layer can short-circuit straight to the bound target instead
of rendering the menu. Reserved menu shortcuts (`_local`, `_gate`,
`_tools_menu`) are valid targets too. New /api/hosts CRUD + a Hosts
tab in the sidebar.
**Prometheus `/metrics`** endpoint. Tiny lock-free implementation —
just AtomicU64s and a Display impl, no `prometheus` / `metrics-rs`
dep. Counters: DHCP replies (per arch label), DHCP declined, TFTP
transfers (per status), TFTP bytes, HTTP requests (per route).
Gauges: ISO count, client count, gate count, gate-imaging, NFS active
mounts, uptime, build info. Plain text exposition format,
text/plain;version=0.0.4 content-type, no auth (all metric values are
non-sensitive counts).
**Light + dark themes**. CSS tokens on `:root` and
`:root[data-theme=light]`, swap by toggle button (top-right) or `T`
hotkey. Persisted in localStorage; pre-paint inline script avoids
dark<->light flash. Light palette designed against the Netbox Labs
reference screenshot — near-white surfaces, soft grey dividers,
accent unchanged for brand consistency. Terminal pane stays dark in
both themes (it's a console, that's the right read).
**Animated SVG logo + forge widget**. New `logo.svg` is a refined
silver/grey anvil. New `anvil-forge.svg` adds rising sparks and a
pulsing underglow via SMIL — pure SVG, no GIF, no JS animation loop.
Used:
- in the **forge progress** widget on Dashboard + Forge Gate, paired
with a `linear-gradient(warn -> accent)` bar with a moving sheen;
goes idle (greyscale, no sheen) at zero imaging load
- in the page-load `<div class=loader>` that replaces the old
"Loading..." text
## Code cleanup pass
`cargo clippy --workspace --all-targets` is now warning-free. Spot
fixes across the tree:
- `format!()`-into-`String` -> `std::fmt::Write::write!`
- manual reverse comparators -> `Reverse`
- `map_or(false, ...)` -> `is_some_and`
- redundant closures -> method references
- `r#"..."#` raw strings without `"` -> `r"..."`
- `std::io::Error::new(Other, ...)` -> `Error::other`
- `as i32` on `c.id()` -> `cast_signed()`
- merged identical match arms
## Windows workflow validation
New integration test synthesizes an ISO9660 with the SOURCES\\BOOT.WIM
sentinel, uploads it, asserts:
1. introspection labels it `windows_pe` with has_boot_wim=true,
2. the boot entry is `BootKind::Wimboot` with all five canonical
files (bootmgr, bootmgr.efi, bcd, boot.sdi, boot.wim),
3. the rendered iPXE script chains wimboot with `initrd --name`
entries for each file, and
4. NO trust-store strings appear in the rendered output: bcdedit,
testsigning, certutil, httpdisk, and test-signed are all
explicitly forbidden as a hard guarantee.
WinPE bootstrap (startnet.cmd) picks up the Bootimus v0.1.58 lessons:
explicit `net start Workstation` before `net use` to avoid the SMB
client lazy-init race, and surfaces errors instead of blind retries.
## Docs
architecture.md gains a "Phase 5" section explaining the host-bindings
+ metrics + theming + Windows-test work, plus a refreshed "deferred
to Phase 6" list (real-hardware integration, autounattend library,
distro profile manifest, WoL trigger, syslog receiver, IPv6).
README updates the status line, the "what it does" list, and adds
the new Hosts/Terminal tab names.
|
||
|
Miles Ward
|
3517c67831 | Name update |